Description
Aviation Windsocks 8 Foot.
Designed to continually perform in a predictable manner. The size of the opening that catches the wind is quite important. The length of the windsock and the size of the exit diameter at the end of the windsock are important.
Ordering Windsocks
When ordering Commercial or Aviation Windsocks these are the two things you need to know.
1. The length of the windsock
2. The diameter of the opening of the windsock.
Commercial Windsocks, Colours and where they are used.
The reason the two different colours are used :
1. White – Highly stable chemical and UV resistant. White is a very visible colour and has the least problem with fade.
2. Yellow –The colour yellow is highly stable and chemical and UV resistant. It is a highly visibility colour and can be clearly seen from a distance. Yellow is easier to see against a white clouds and is very noticeable looking from the ground
Warning :
The colours Orange, Pink and Red are difficult colours to stabilise. The ultra violet rays from the Sun quickly causes fading.
Aviation Windsocks, available in 8 Foot and 12 Foot lengths.
There are two windsocks colours available – White and Yellow.
Calibrations.
The 8 and 12 foot windsocks are calibrated for Aviation, fitted with Brass eyelets and heavy duty cable ties to attach to a 2 ft. diameter frame (for the 8 foot windsock) or a 3 ft. diameter frame (for the 12 foot version).
Standard Duty Commercial Windsocks .. They are active even in light wind conditions.
12 Foot Windsocks are in standard use at Airports, Licensed Airstrips and Council Airstrips. The “Primary” windsock should be White and all others Yellow in colour.
It is quite possible that there are several “Primary” windsocks at an airport, (one for each runway). Often there is one near the end of each runway.
Colour choice.
It is usually the colour that stands out the best. Looking skyward Yellow stands out better against white clouds.
Both colours illuminate well with the 12 volt lighting option, as the materials used, have good fibre optic qualities.
Support Frames for 8 and 12 Foot Aviation Windsocks.
Made of 304. 316. 320 and 4000 grade stainless steel. The 8 foot windsock frame has a 24 inch (660mm) diameter rim. The frame for the 12 foot windsock has a 36inch (900mm) diameter rim.
- The sealed ball bearings used top and bottom, will never require any lubrication or attention. The top bearing has a press fit seal cap. This protects the top bearing.
- The Base Plate of the frame is 10mm plate, with studs at 50mm and 80mm spacing. Stainless Steel washers and nylon nuts come complete with the “Base Welding Adapter”.
- The Frame is Stainless Steel (which will not weld to ferrous metals).
- “Base Welding Adapter” is essential if the intention is to attach the frame to a metal pole end.
- “The Base Welding Adapter” predrilled matches the frame stud pattern and base. Made of Malleable Low Carbon Ferrous Metal it allows welding, using gas or electric arc methods.
The support frames carry a 25 year replacement warranty.
Available Made Order. Frames made from 316 grade stainless steel, for Off-Shore Oil Rigs and/0r other highly corrosive environments.
………………………………………………………………………………………….
Postage :
Use postage calculator to establish delivery cost, however if ordering multiples check with Robert for freight savings.